What: 1975 Ferrari Dino 308 GT4 Color: Azzurro Blue Metallic (azzurroblumetallizzato; metallic UNI; 666010; Ferrari) Chassis: 12752 Mileage: 4,700 km, 2,900 miles CurrentPrice: $71,000 Location: Woodside, CA Listing: Bring a Trailer
There’s no doubt that the Ferrari Dino 308 GT4 is a quirky thing in the lexicon of Maranello. The only Ferrari from the factory to have ever been designed by Bertone, it’s also a rare 2+2 mid-engine configuration that was sold and badged as a Dino in Europe as this one was.
This particular car, painted rare Azzuro Blue Metallic over white leather interior was restored in 2016 and fitted with larger 16-inch Superformance wheels that mimic a factory appearance, though with a larger diameter.
This is a stunning and unique example of an equally unique Ferrari model. Check out more details in its listing over on Bring a Trailer.
On April 28, 1975 a one-off Porsche 917 race car left the Weissach development center. It headed not for a track – like every 917 before – but instead, and for the very first time, it took to public roads.
Atlanta. It was an audacious adventure driven by the passion of a private owner and the commitment of a small team within Porsche to fulfil the wishes of customers, no matter how outlandish the request. Fittingly, that first exploratory drive did not end after a prudent cruise around local roads, but when the car reached Paris – several hundred miles later. It was a feat that would go on to inspire many more adventures in the decades that would follow.
The car – 917 chassis 30 – which was originally raced, featured an array of changes that dominated endurance racing in the early 1970s. Some of the enhancements were mandated by the laws of the time, and others at the request of its owner – Italian businessman and Martine heir Gregorio Rossi di Montelera – known more simply as “Count Rossi”, a renowned powerboat racer, bobsledder and Porsche enthusiast.
Finished in Martini Silver, the car featured a set of rudimentary exhaust mufflers, additional mirrors, side indicators and even a horn. It carried the mandatory spare tire beneath its rear clamshell. Inside there were small concessions to comfort – the two seats (a requirement for endurance racers of this period) were re-finished in tan leather (commissioned from Hermes) with accompanying suede surfacers for the roof lining, doors and dashboard. The gear shifter retained the same wooden finish as the racers, and even kept the same drilled, lightweight key. The car originally wore an Alabama license plate obtained by Count Rossi.
Today the car is still enjoyed by its enthusiastic current owner on the open roads in the south of France where it resides – now registered in the U.K. and having undergone recent restoration work (albeit preserving its original paint and interior) to prepare it for its next half century of surprising other road users.
Importantly, as it’s descendent enjoys success on the track today, the spirit and desire within Porsche that allowed the creation of a 917 for the road all that time ago remains very much alive five decades on – prompting the question: what if?
About Porsche Cars North America, Inc. | One Porsche Drive, Atlanta, GA 30354 USA
Established in 1984, Porsche Cars North America, Inc. (PCNA) is the exclusive U.S. importer of the Porsche 911, 718 Boxster, 718 Cayman, Macan, Cayenne, Panamera and Taycan. The Porsche Car Configurator can be used by anyone to customize and pre-order any vehicle in that lineup at any time. Headquartered in Atlanta, Georgia, since 1998, PCNA is home to the first Porsche Experience Center in North America, which features two module-based 1.6 mile driver development tracks, a business center and Restaurant 356. The campus is also home to the U.S. headquarters of Porsche Classic. The company operates a second Porsche Experience Center near Los Angeles. That complex features a driver development track with eight educational modules totaling 4.1 miles, a business center, Restaurant 917 and the headquarters of Porsche Motorsport North America. PCNA supports 203 independently owned and operated Porsche dealerships in the U.S., four Porsche studios and five satellite stores in the U.S., including supplying parts, service, marketing, and training. They, in turn, work to provide Porsche customers with a best-in-class experience that is in keeping with the Porsche brand’s 75-year history of leadership in the advancement of vehicle performance, safety, and efficiency. PCNA is an indirect wholly owned subsidiary of Porsche AG, which is headquartered in Stuttgart, Germany.
At the core of this success is Porsche’s proud racing heritage that boasts some 30,000-plus motorsport wins to date.
This rare colored Dino 308 GT4 was owned by the same family for over three decades until it was sold to the current owner in 2020. The car has been repainted in its original color, Blu Azorro Metallizzato, the same color as used in the brochure (see photo).
A notable detail about the 308 GT4. It is the only factory Ferrari design from Bertone, a Gandini original. Though these don’t carry the premium of earlier Pininfarina Dinos, the 308 GT4 represents one of the genuine bargains in the Ferrari collector world.
Creators of the Restomod Movement Present a Top-Down Modern Reinterpretation of this Iconic Classic Jeep
[Source: ICON]
LOS ANGELES, CA – ICON 4×4, the pioneering automotive design firm that started the automotive restomod category, is proud to introduce the latest over-the-top build created with expert craftsmanship and design. A 1975 Jeep Cherokee is part of ICON’s exclusive series of one-off builds, called The Reformers. The Reformer series seeks to play a bit of revisionist history, transcending and elevating classic vehicles with a focus on revolutionizing the drivability, all while elevating every detail within the builds themselves.
ICON and its founder and lead designer, Jonathan Ward, undertook an additional mission with this build: to address the negligent errors of the original Detroit designers by correcting the Native American tribal homages that were incorporated into the vehicle’s original design and adding new ones where it made sense. Detroit designers of the 1960s paid little attention to tribal accuracy or historical references in their work. However, drawing on Jonathan Ward’s experience with his leather goods brand, J. Ward, and his apparel line, Campfire Coats, ICON was uniquely positioned to correct these historical oversights and honor the true cultural significance of the original designs. The original concept of the Jeep Cherokee featured several missteps, including an inaccurate depiction of a Native American tribal graphic on the beltline and the use of imitation Naugahyde leather instead of genuine cowhide. The tribal graphic? Not from the Cherokee nation. The stamped ‘hide’ of faux Naugahyde in a Western style? Completely off the mark. One of the most compelling aspects of these Reformer projects is the chance to thoroughly study the original design priorities. By understanding both the strengths and shortcomings of the original, ICON is able to expand on the design from a fresh, more authentic perspective—correcting inaccuracies while staying true to the spirit of the vehicle.
ICON began with an original 1975 Cherokee and a 1965 Jeep Gladiator, carefully selecting the best elements from these key moments in Jeep’s evolution. Jonathan Ward blended these iconic features to create something truly unique and exceptional, paying homage to the brand’s rich history while simultaneously elevating it to new heights. Drawing on his expertise and the communities connected to his leather goods brand and apparel line, Jonathan Ward conducted a deep dive into traditional Cherokee textile and clay arts. He explored the rich symbolism embedded in each pattern and detail, ensuring that every element in the design was authentic and respectful of Cherokee traditions.
After extensive research and close collaboration with tribal leaders, Jonathan Ward discovered a traditional Cherokee pattern symbolizing ‘safe flight’—an abstract representation of an eagle feather. Historically, this design adorned water vessels and blankets when tribe members embarked on perilous journeys. It was a natural choice for the vehicle, featured prominently along the body and integrated into numerous details, from the gauges and coat hooks to the door trim and more.
For the interior, Ward selected two premium leathers in place of the original vinyl. The primary leather, sourced from Moore & Giles, was chosen for its rich aroma and exceptionally soft texture. The second, from Wickett & Craig, North America’s oldest tannery since 1867, is a vegetable-tanned leather traditionally used for saddles. This durable material was the perfect choice for the hand-tooled seat and door panel accents. In keeping with traditional craftsmanship, Ward enlisted Trajan Vieira, a master artisan and founder of Mercury Leather Works, to carve the leather in the Sheridan style, a technique that gained popularity in early 1900s Wyoming. With German wool square weave carpets hemmed in leather, an Alcantara headliner, bespoke gauges in the original housing, dash knobs, and custom trim, the result is a legitimate piece of art on wheels.
The vehicle is finished in Custom Porsche Chalk paint (kreidegrau; non-metallic UNI; M9A / 3H; Porsche), a sophisticated shade that provides a striking contrast against the sleek Bentley black roof, enhancing the vehicle’s modern silhouette. Along the side, a meticulously hand-painted graphic, an abstract representation of the eagle feather in black and blood red, pays homage to Cherokee heritage, adding a powerful visual statement. Every exterior detail is a testament to ICON’s design prowess. From the grille and badges to the mirrors, handles, and taillight housings, all hard trim was custom-designed and meticulously crafted from machined 6061 aluminum, ensuring durability while exuding refined craftsmanship.
Mechanically, this Cherokee rides on a one-off Art Morrison chassis with coil-over suspension, hydroboosted Brembo brakes, Fox Racing adjustable nitrogen-charged shocks, and tunable sway bars. Under the hood, a HEMI 6.4 V8 delivers 485 horsepower and 475 lb-ft of torque, paired with a custom-built GM 4L85E transmission, Atlas II transfer case, and a PSC power steering box. The vehicle is equipped with Currie Industries ICON-specific Dana high-pinion axles (44 front, Extreme 60 rear). The build is completed with BF Goodrich All-Terrain K02 tires and ICON Old School Forged 18″ aluminum rims with stainless dog dish hubcaps.
Modern conveniences, including a Vintage Air Gen IV HVAC system, power windows, door locks, a digital audio system with Focal Utopia speakers, and discreet LED interior lighting, are subtly integrated to preserve the vehicle’s timeless aesthetic, ensuring it will be cherished for decades.
Jonathan Ward, Founder of ICON, reflects on the project; “This project was both an incredible honor and a true joy from a vehicle designer’s perspective. Commissioned by a long-time ICON client with whom we’ve built a deep bond of trust, we were given the rare opportunity to push boundaries and ‘go further.’ The level of creative freedom we were afforded is something every custom designer dreams of. Immersing myself in the various art forms and traditions honored in this build was a deeply rewarding experience, making this project truly one-of-a-kind.”
For more information on the all-new 1975 ICON Cherokee “Safe Flight” and their other builds please visit www.icon4x4.com or call 818-280-3333.
